Why you need one Hard Drive Monitor?

Determine your hard drive working time(How to check hard disk Health)

Why you need one Hard Drive Monitor?

Normally, for most PC users, they will save all main important files and data on their hard disks, hard disks, the hard disks are the most important of the various types of permanent storage used in your PCs. This Program support to read and monitor S.M.A.R.T. data of all your hard drives, these data is important for keeping health of your disks.

HARD DISK monitor S.M.A.R.T.

While you run some big data operations on your disk for a long time, your hard drive will be more and more hotter, once the drive temperature over some critical point, it become very danger for your hard drive data. This program is not data recovery software, but it can help you to monitor all your hard disks, it is a free and handy HDD diagnostic utility for your everyday use.


Check and monitor the health of your disks to prevent data loss using Self-Monitoring Analysis and Reporting Technology (S.M.A.R.T.). Detect bad sectors on a disk surface by running Advanced Disk Scan. Instantly retrieve the disk health information from the application running in the System Tray.

About S.M.A.R.T.

S.M.A.R.T. is short for “Self-Monitoring, Analysis, and Reporting Technology”, sometimes written as SMART, is a monitoring system for computer hard disks to detect and report on various indicators of reliability, manufacturers that have supported one or more S.M.A.R.T. attributes in various products include: Samsung, Seagate, Hitachi (IBM before), Fujitsu, Maxtor, and Western Digital.

Determine your hard drive working time

Please note, if SMART is not enabled on your disks, program will can’t read SMART data. These SMART data provide a mechanism for running disk self-tests and for monitoring aspects of disk performance. If SMART is not enabled, the main shortcoming is that it doesn’t provide a direct mechanism for informing the OS or user if problems are found.

Checking S.M.A.R.T. Without Third-Party Tools

To do a quick S.M.A.R.T. check without installing any third-party software, you can use a few commands included with Windows. First, open a Command Prompt window. (Press the Windows key, type Command Prompt, and press Enter.)

In the Command Prompt window, type the following commands, pressing Enter after each:


If everything is working properly, you should see the status OK displayed. Other statuses can indicate problems or errors retrieving S.M.A.R.T. information.

Key benefits of S.M.A.R.T. tools

  • The key benefits found in most of the popular S.M.A.R.T. tools are as follows.
  • Monitors the health status of hard disks.
  • Predicts disk failures.
  • Checks for disk problems.
  • Gives detailed status reports.
  • Provides backup before the hard drives fail.
  • Alerts you through email or desktop notifications

Top 8 S.M.A.R.T test software

  • Hdsentinel
  • O&O DriveLed
  • Active Smart
  • Crystal Diskinfo
  • Hdd Health
  • Acronis Drive Monitor
  • Ashampoo HDD Control
  • Active@ Hard Disk Monitor
Please follow and like us: